Research work Published/ Accepted in SCOPUS Indexed Journals - 101* So Far

  Research work Published/ Accepted in SCOPUS Indexed Journals - 101* So Far

1.      A.Damodar Reddy, P.N.Karthikeyan, S.Krishnaraj, Adarsh Ajayan, K. Sunil Kumar Reddy, Dr.Ram Subbiah (2021), Analysis and Optimization of Hot Extrusion Process on Strenx Steel 900Materials Today: Proceedings. Paper Accepted. https://doi.org/10.1016/j.matpr.2021.04.453 (Scopus Indexed)

2.      S.Sathish, Mubeen Shaikh, Girisha L, R.Senthil Kumar, M.Ramesh Kumar, Dr.Ram Subbiah (2021), Evaluation of Hardness and analysis of Parameters on Reinforced Al-MMCMaterials Today: Proceedings. Paper Accepted https://doi.org/10.1016/j.matpr.2021.04.631 (Scopus Indexed)

3.      D.Prathusha , J.Venkatesh, K.K Arun, Kulkarni Sanjay Kumar, S.Prabhu, Dr.Ram Subbiah (2021), Machining Behaviors of Nickel Titanium Composite using Non Traditional Machining Processes, Materials Today: Proceedings. Paper Accepted https://doi.org/10.1016/j.matpr.2021.04.604 (Scopus Indexed)

4.      S.Sathish, K.Kesavaraj, L Girisha, A.Daniel Das, Pradeep Johnson, Dr.Ram Subbiah (2021), Parametric Optimization of Explosive Welding Process on Nickel Titanium Alloys, Materials Today: Proceedings. Paper Accepted https://doi.org/10.1016/j.matpr.2021.04.490 (Scopus Indexed)

5.      M.Rajkumar, N.Senthil Kannan, M.Bruhathi, D.Malteshkumar, L.Girisha, A.Felix Sahayaraj, Dr.Ram Subbiah (2021), Cryogenic Treatment and Taguchi Optimization of Haynes Alloy, Materials Today: Proceedings. Paper Accepted.(Scopus Indexed)

6.      D.RaguramanK.Vetri VelmuruganG.Bharath ReddyV.Paramasivam, P.Akshay NandanD.Rahul, Dr.Ram Subbiah (2021), Wear Behavior Analysis of Vitallium Metal Matrix Composite, Materials Today: Proceedings. Paper Accepted.(Scopus Indexed)

7.      P.ManikandanVuda Rahul, M.ThirunavukkarasuN.Senthil Kannan, Mubeen sheikhK.Sai Subramaniam, Vinay Kumar. V, Dr.Ram Subbiah (2021), Influence of Mixed Dielectric Fluids on Material Removal Performance during Electric Discharge Machining Process, Materials Today: Proceedings. Paper Accepted.(Scopus Indexed)

8.      S.Vasanthaseelan, P.Manoj Kumar, R.Anandkumar, K.Hari Ram, Dr.Ram Subbiah , V.Suresh, A.S.Abishek, R.Anitha , P.Aravinth, S.V.Balaji (2021), Investigation on Solar Water Heater with Different Types of TurbulatorsMaterials Today: Proceedings. Paper Accepted https://doi.org/10.1016/j.matpr.2021.05.530 (Scopus Indexed)

9.      A.Felix Sahayaraj, N.Senthil Kannan, Girisha L, S.Kannan, D.Rahul, Dr.Ram Subbiah (2021), Performance analysis of Peel Test on Fused Filament Fabricated Polypropylene-Aluminium, Materials Today: Proceedings. Paper Accepted https://doi.org/10.1016/j.matpr.2021.05.246 (Scopus Indexed)

10.  S.N.Dinesh, S.Ravi, P.Manoj Kumar, Dr.Ram Subbiah, Alagar Karthick, P.T.Saravanakumar, R.Aravinth Pranav (2021), Study on an ETC Solar Water Heater using flat and Wavy Diffuse Reflectors, Materials Today: Proceedings. Paper Accepted. https://doi.org/10.1016/j.matpr.2021.05.561 (Scopus Indexed)

11.  M.Balaji, S.N.Dinesh, S.Vikram Vetrivel, P.Manoj Kumar, Dr.Ram Subbiah (2021), Augmenting Agility in Production Flow through ANP, Materials Today: Proceedings. Paper Accepted. https://doi.org/10.1016/j.matpr.2021.06.053 (Scopus Indexed)

12.  N.Vigneshkumar, M.Venkatasudhahar, P.Manoj Kumar, A.Ramesh, Dr.Ram Subbiah, P.Michael Joseph Staline, V.Suresh, M.Naresh Kumara, S.Monitha, R.Manoj kumara, M.Kriuthikeswarana (2021), Investigation on Indirect Solar Dryer for Drying Sliced Potatoes using Phase Change Materials (PCM), Materials Today: Proceedings. Paper Accepted https://doi.org/10.1016/j.matpr.2021.05.562 (Scopus Indexed)

13.  M.Ramaraoa, Francis Luther King M, Sivakumar.A, V. Manikandand, Vijayakumar.M, Dr.Ram Subbiah (2021), Optimizing GMAW parameters to Achieve High Impact Strength of the Dissimilar Weld Joints using Taguchi Approach, Materials Today: Proceedings. Paper Accepted.(Scopus Indexed)

14.  B.Ch Nookaraju, Kezia Rani P, P S V Kurmarao, Naga Sarada S, N Sateesh, A Anitha Lakshmi, Dr.Ram Subbiah (2021), Experimental and Transient Thermal Analysis of Screen Mesh Wick Heat Pipe, Materials Today: Proceedings. Paper Accepted and available online https://doi.org/10.1016/j.matpr.2021.02.293 (Scopus Indexed)

15.  R.Prem KumarM.Robert PaulJ.ManikandanG.Balamuruga Mohan RajS.GanapathyDr.Ram Subbiah (2021) Evaluation of welding strength and optimization on seam welding of domex steel, Materials Today: Proceedings, Paper Accepted and available online https://doi.org/10.1016/j.matpr.2021.01.623 (Scopus Indexed)

16.  Mahesh Mallampati, K. Somasundaram, J.Saranya, C.Harsha vardhan, V.Rakesh Kumar, Dr.Ram Subbiah (2021) Analysis of Responses on Zirconium Carbide based Titanium using Laser Beam Machining, Materials Today: Proceedings. Paper Accepted and available online https://doi.org/10.1016/j.matpr.2020.12.967 (Scopus Indexed)

17.  Godala ShaikshavaliM.Murali MohanG.Praveen Kumar YadavS.KrishnarajL.GirishaDr.Ram Subbiah (2021) Analysis of parametric effect on domex steel using plasma arc Machining process, Materials Today: Proceedings, Paper Accepted and available online https://doi.org/10.1016/j.matpr.2021.01.622 (Scopus Indexed)

18.  D. Deepika, A. Anitha Lakshmi, Dr. Ch. Srinivasa Rao, Dr. N. Sateesh, B. Ch. Nookaraju, Dr. Ram Subbiah (2021) Evaluation and optimization of Material Properties of Tailor welded Al 6061alloy and ASS 304 sheets Using Taguchi Robust Design, Materials Today: Proceedings, Volume 46, Part 1, 2021, Pages 746-751, https://doi.org/10.1016/j.matpr.2020.12.413 (Scopus Indexed)

19.  A.Felix SahayarajJ.VenkateshR.RaghuR.Senthil KumarE.Manikandan, Dr.Ram Subbiah (2021) Analysis of formability and optimization on nickel coated stainless steel sheet, Materials Today: Proceedings, Paper Accepted and available online https://doi.org/10.1016/j.matpr.2021.01.625 (Scopus Indexed)

20.  S.Nirmal MosesN.Keerthi KumarM.BalasubramanianA.Daniel DasMubeenShaikhDr.Ram Subbiah (2021)  Parametric optimization of hot chamber pressure die casting process, Materials Today: Proceedings. Paper Accepted and available online https://doi.org/10.1016/j.matpr.2021.01.621 (Scopus Indexed)

21.  R.Raghu Chan, R.Balaji, R.Karthikeyan , M.Balasubramanian , SNS Santhosh Kumar, Dr.Ram Subbiah (2021) Optimization and Machinability analysis of Chromium Composite, Materials Today: Proceedings. Paper Accepted and available online https://doi.org/10.1016/j.matpr.2021.01.620 (Scopus Indexed)

22.  R.Prem Kumar, Girisha L, T.Pravinprabu, A.Felix Sahayaraj, SNS Santhosh Kumar, Dr.Ram Subbiah (2021) Analysis of Abrasive Wear Resistance on Scandium Composite, Materials Today: Proceedings. Paper Accepted and available online https://doi.org/10.1016/j.matpr.2021.01.203 (Scopus Indexed)

23.  D. Deepika, A. Anitha Lakshmi , Dr. Ch. Srinivasa Rao , Dr. N. Sateesh, B. Ch. Nookaraju , Dr. Ram Subbiah (2021) Formability of Tailor Welded Blanks of Aluminium Alloy and Steel- A Review, Materials Today: Proceedings, Volume 46, Part 1, 2021, Pages 722-728, https://doi.org/10.1016/j.matpr.2020.12.192  (Scopus Indexed)

24.  G.Phanindra Raja Varma, M.Sai Krishna, M.Ramanathan, G.Meghana, V.Naveen , Dr.Ram Subbiah (2021) Estimation of welding strength on Cr-Mo using FSW Process, Materials Today: Proceedings. Paper Accepted and available online (Scopus Indexed) https://doi.org/10.1016/j.matpr.2021.01.197

25.  M.Makesh, G.Sivaraman, N.Saravanan, S.Prashanth, Dr.Ram Subbiah, K.Anand (2021), Experimental Investigation of Control Parameters for Machining of Copper Alloys using Electrochemical Micromachining, Materials Today: Proceedings, Volume 45, Part 2, 2021, Pages 2498-2500, https://doi.org/10.1016/j.matpr.2020.11.108 (Scopus Indexed)

26.  Rohit Sai Krishna A , Prudhvi Sri Kalyan K , Chandu Prasad Yadav M , J.Saranya , B.Ch.Nookaraju, A.Anitha Lakshmi , S.Prashanth , Ram Subbiah (2021) Assessment of AISI 304 Stainless Steel by Cyaniding process under Dry Sliding Conditions, Materials Today: Proceedings.   Volume 44, Part 1, 2021, Pages 1536-1539, https://doi.org/10.1016/j.matpr.2020.11.737 (Scopus Indexed)

27.  Divya Marelli, Dr.N.Sateesh, B.Ch.Nookaraju, A.Anitha Lakshmi, Dr.Ram Subbiah (2021) Multi performance  Optimisation Of  Wire-Cut EDM Process Parameters of Incoloy 800 alloy using Grey relational analysis, Materials Today: Proceedings. Volume 44, Part 1, 2021, Pages 2416-2420, https://doi.org/10.1016/j.matpr.2020.12.464 (Scopus Indexed)

28.  Lakshmi Deepak Tadepalli, Ananda Mithra Gosala , Lokesh Kondamuru , Tappa Vineeth Raj , T. Anirudh , Dr. J Saranya , Dr. V. Vinod Kumar , Dr. Ram Subbiah (2021) Microstructure Analysis and Wear Characterization of AISI 316 Austenitic Stainless Steel by Cyaniding Process, Materials Today: Proceedings. Volume 44, Part 1, 2021, Pages 1455-1458, https://doi.org/10.1016/j.matpr.2020.11.633 (Scopus Indexed)

29.  M. Mamatha Gandhi , Animesh Bain , G.Lakshmi Prasanna , M.Vamshi , J.Saranya , N.Dhruthi , N.Sateesh , Dr. Ram Subbiah (2021) Examination on Dry Sliding Wear Behavior of AISI 304 Stainless Steel Treated with Salt Bath Nitriding Process, Materials Today: Proceedings. Volume 44, Part 1, 2021, Pages 1412-1417, https://doi.org/10.1016/j.matpr.2020.11.625 (Scopus Indexed)

30.  Shivani Koppula , Venkata Gautam Jagarlamudi, Reddi Sai Prudhvi, Aakula Rajkumar , S. Prashanth , Dr. J. Saranya , Dr.N.Sateesh , Dr.Ram Subbiah (2021) Investigation of AISI 904L Austenitic Stainless Steel by Carbonitriding Process under Dry Sliding Conditions, Materials Today: Proceedings. Volume 44, Part 1, 2021, Pages 1418-1422, https://doi.org/10.1016/j.matpr.2020.11.626 (Scopus Indexed)

31.  K.Ramya Sree , G.Keerthi Reddy , G.Lakshmi Prasanna , J. Saranya , A.Anitha Lakshmi , M.Swetha , T.Vineeth Raj, Ram Subbiah (2021) Dry Sliding Wear Behavior of Treated AISI 304 Stainless Steel by Gas Nitriding Processes, Materials Today: Proceedings. Volume 44, Part 1, 2021, Pages 1406-1411, https://doi.org/10.1016/j.matpr.2020.11.624 (Scopus Indexed)

32.  N.Ravikumar, P.Sharmila, S.P.Premnath, Rajakumar S Rai, J.Mohammed Feros Khan, Dr.Ram Subbiah (2021)Performance and Optimization of Parameters on Rubber Punching Process, Materials Today: Proceedings, Volume 45, Part 2, 2021, Pages 2581-2583, https://doi.org/10.1016/j.matpr.2020.11.275 (Scopus Indexed)


33.  Veernapati Gitanjali, Panati Nithya, P.Pandiarajan, Nunna Dhruthi, Tappa Vineeth Raja, Dr.Ram Subbiah (2021) Performance Machinability through Electrochemical Grinding of Strenx Steel, Materials Today: Proceedings, Volume 45, Part 2, 2021, Pages 2479-2481https://doi.org/10.1016/j.matpr.2020.11.075. (Scopus Indexed).


34.  Santhanakrishnan Raman, J. Vairamuthu, B. Stalin, Dr.Ram Subbiah, S. Maniraj (2021), Hardness Performance Analysis of Chromel Composite Using End and Lateral Quenching Method, Materials Today: Proceedings, Volume 45, Part 2, 2021, Pages 1839-1842, https://doi.org/10.1016/j.matpr.2020.09.037 (Scopus Indexed).


35.  T.Blesslin Sheeba, A.Albert Raj, D.Ravikumar, S.Sheeba Rani, P.Vijayakumar, Dr.Ram Subbiah(2021) Analysis of Silica based Prosthetic Human Teeth using 3D Printing Machine for Dental Assistance, Materials Today: Proceedings, Volume 45, Part 2, 2021, Pages 2440-2443, https://doi.org/10.1016/j.matpr.2020.11.016  (Scopus Indexed) 

36.  Girisha L, S.Karthik, B.Kalins, K.Bala Koteswarao, Dr.Ram Subbiah, S.Marichamy (2021) Parametric Optimization and Spark Erosion Behaviours of Synthesized Niobium Composite, Materials Today: Proceedings, Volume 45, Part 2, 2021, Pages 2456-2459, https://doi.org/10.1016/j.matpr.2020.11.021(Scopus Indexed)

37.  K. Muralidharan, S. Shalini Packiam Kamala, D. Alankrutha, K.Bhanu prakash, Dr.Ram Subbiah, S.Marichamy (2021), Parametric Analysis and Performance of Laser Cutting on Strenx Steel, Materials Today: Proceedings, Volume 45, Part 2, 2021, Pages 2313-2316, https://doi.org/10.1016/j.matpr.2020.10.573 (Scopus Indexed)

38.  Kevin Charles Alamanda , Sivaraman Nilapparai, Vicharapu Naveen, Yedla Shyam Prasad, Dr.Ram Subbiah, S.Marichamy (2021), Optimization and Improvement of Heat Transfer through Aluminium Oxide based Nano Fluid, Materials Today: Proceedings, Volume 45, Part 2, 2021, Pages 2198-2201, https://doi.org/10.1016/j.matpr.2020.10.110 (Scopus Indexed)

39.  J. Granty Regina Elwin, S. Joshua Kumaresan, C.Ram Kumar, Ajith.B.Singh, S.Marichamy, Dr.Ram Subbiah (2021), Optimization of System and Piezoelectric Effect on PZT Crystal, Materials Today: Proceedings, Volume 45, Part 2, 2021, Pages 2006-2009, https://doi.org/10.1016/j.matpr.2020.09.475 (Scopus Indexed)

40.  K. Rajasuthan, M.Palpandi, Veernapati Gitanjali, Panati Nithya, Dr.Ram Subbiah, S.Marichamy (2021), Evaluation of Material Removal Rate of Stellite Alloy Using Unconventional Machining Processes, Materials Today: Proceedings, Volume 45, Part 2, 2021, Pages 2277-2281, https://doi.org/10.1016/j.matpr.2020.10.260 (Scopus Indexed)

41.  Shiva Naga Sathwik Sridhara, Sree Chandra Siddhardha Allada, Sharmi Sai PV, Spandana Banala, Dr.Ram Subbiah, S.Marichamy (2021), Tensile Strength Performance and Optimization of Al 7068 using TIG Welding Process, Materials Today: Proceedings, Volume 45, Part 2, 2021, Pages 2017-2021, https://doi.org/10.1016/j.matpr.2020.09.481 (Scopus Indexed)

42.  M.Prabhakaran, C.Sivakandhan, Chevvuri Venkata Sai Ram Gopal, Sai Nikhilesh Pilla, Dr. Ram Subbiah, S.Marichamy (2021), Machinability Investigations on Cupronickel MMC through Unconventional Machining Processes, Materials Today: Proceedings, Volume 45, Part 2, 2021, Pages 2220-2223, https://doi.org/10.1016/j.matpr.2020.10.117 (Scopus Indexed)


43.  A.Jayapradha, G. Jims John Wessley, G. Vimalarani, P. Ramesh Kumar, Dr.Ram Subbiah, S. Maniraj (2021), Mathematical modeling and Investigation on Aluminium Bronze MMC using ECM Process, Materials Today: Proceedings, Volume 45, Part 2, 2021, Pages 2121-2124, https://doi.org/10.1016/j.matpr.2020.09.726 (Scopus Indexed)


44.  B.Kalins, Vicharapu Naveen, Girisha L, Uppala Nutan Kumar, Dr.Ram Subbiah , S.Marichamy (2021),  Numerical Investigation on Laser Welding of Titanium Plates, Materials Today: Proceedings, Volume 45, Part 2, 2021, Pages 2224-2227 https://doi.org/10.1016/j.matpr.2020.10.118 (Scopus Indexed)


45.  Girisha.L, S. Sridhar, Lakshmi Deepak Tadepalli , M.Swetha, Dr.Ram Subbiah, S.Marichamy (2021),   Performance analysis and Taguchi approach on Wire Cut EDM using Microwave Sintered Chromium Composite, Materials Today: Proceedings, Volume 45, Part 2, 2021, Pages 2105-2108, https://doi.org/10.1016/j.matpr.2020.09.700 (Scopus Indexed)


46.  Dr.Ram Subbiah, Dr.N Sateesh, Dr.S.K Singh, Dr.S Ravi Sekhar, Dr.B Tanya and A Anitha Lakshmi, 184 (2020)Formation of Multiple Phase Microstructure and Wear Investigation on Treated AISI 904L SS by Low Temperature Ion Nitriding Process, E3S Web of Conferences, https://doi.org/10.1051/e3sconf/202018401001 (Scopus Indexed)


47.  M.Mamatha Gandhi, Animesh Bain, Rohith P, R Srilatha, Dr.Ram Subbiah 184 (2020), Structure and Topography Modifications of Treated AISI 316LN Stainless Steel after Friction in Dry Sliding Contact by Case Hardening Process, E3S Web of Conferences, https://doi.org/10.1051/e3sconf/202018401002 (Scopus Indexed)


48.  K Ramya Sree, G Keerthi Reddy, K Aishwaryaa, E Nirmala Devi, Dr.Ram Subbiah 184 (2020), New Insights of Wear Behavior Analysis on Low Temperature Treated AISI 253MA Stainless Steel Material by Gas Nitriding Process. E3S Web of Conferences, https://doi.org/10.1051/e3sconf/202018401003 (Scopus Indexed)


49.  Dr.S.Ravi Sekhar, Dr.D.Govardhan, Dr.R.Karthikeyan, Dr.Ram Subbiah 184 (2020), Influence of Process Parameters on Physical and Mechanical Properties of Friction Surfaced Deposits on Low Carbon Steel, E3S Web of Conferences, https://doi.org/10.1051/e3sconf/202018401005 (Scopus Indexed)

50.  Anitha Lakshmi Akkireddy, Swathi Priya, Dr.B.Tanya, Bandhavi Challa, Dr.Ram Subbiah 184 (2020), Investigation of Microstructure and Mechanical Properties of Austenite Stainless Steel 304 during Tempering and Cryogenic Heat Treatment, E3S Web of Conferences, https://doi.org/10.1051/e3sconf/202018401006 (Scopus Indexed)

51.  Dr.Sateesh Nagri, Devakar Reddy S, Dr.Ram Subbiah, Siva Nagaraju D, Nookaraju B Ch 184 (2020), Process Parameters Optimization of Injection Moulding in DN20 Vent of Water Meter Manufacturing, E3S Web of Conferences, https://doi.org/10.1051/e3sconf/202018401008 (Scopus Indexed)


52.  Rohit Sai Krishna Anusuri, Vamshi Krishna Bandarupally, Harshith Devarasetty, Sashank Tamilarasan Dr.Ram Subbiah 184 (2020),  Investigation Of Mechanical Properties Of AISI 316 Stainless Steel By Carbonitriding process, E3S Web of Conferences, https://doi.org/10.1051/e3sconf/202018401018 (Scopus Indexed)


53.  Shivani Koppula, Aakula Rajkumar, Siram Hari Krishna, Reddi Sai Prudhvi, Siripuram Aparna Dr.Ram Subbiah 184 (2020), Improving The Mechanical Properties Of AISI 2205 Duplex Stainless Steel By Cryogenic Treatment Process,  E3S Web of Conferences, https://doi.org/10.1051/e3sconf/202018401019 (Scopus Indexed)


54.  Lakshmi Deepak Tadepalli, Ananda Mithra Gosala, Lokesh Kondamuru, Sai Chandra Bairi, A. Anitha Lakshmi, Dr.Ram 184 (2020), Assessment Of Properties On AISI430 Ferritic Stainless Steel By Nitriding Process, E3S Web of Conferences. https://doi.org/10.1051/e3sconf/202018401020 (Scopus Indexed)


55.  Gandla Lakshmi Prasanna, G Keerthi Reddy, Dr. Ram Subbiah 184 (2020), Evaluation of Properties of AISI 431Grade Stainless Steel by Vacuum Annealing Process, E3S Web of Conferences. https://doi.org/10.1051/e3sconf/202018401021 (Scopus Indexed)


56.  Gandla Lakshmi Prasanna, Dr.J Saranya, Dr. Ram Subbiah 184 (2020), Assessment of AISI 431Grade Stainless Steel Properties by Vacuum Tempering Process, E3S Web of Conferences, https://doi.org/10.1051/e3sconf/202018401022 (Scopus Indexed)


57.  Manne Vamshi, Dr.J Saranya, Dr.Ram Subbiah 184 (2020), Improvement Of Characteristics Of AISI 310 Grade Stainless Steel Material By Carburizing process, E3S Web of Conferences, https://doi.org/10.1051/e3sconf/202018401023 (Scopus Indexed)


58.  Manne Vamshi, Animesh Bain, M Sreekanth, Dr.Ram Subbiah 184 (2020), Wear Characteristics Of AISI 310 Grade Stainless Steel Material By Carbonitriding Process, E3S Web of Conferences, https://doi.org/10.1051/e3sconf/202018401024 (Scopus Indexed)


59.  Anitha Lakshmi Akkireddy, Dr.B.Tanya, Dr.Ram Subbiah, Bandhavi Challa 184 (2020), Formability Studies of Automotive Aluminium Alloy Sheet series: A Review, E3S Web of Conferences, https://doi.org/10.1051/e3sconf/202018401036 


60.  Pradeep Kumar Manne, Nutenki Shravan Kumar, Dr.B.Tanya, A Anitha Lakshmi, Dr.Ram Subbiah 184 (2020), Powder Metallurgy Techniques for Titanium Alloys-A Review, E3S Web of Conferences, https://doi.org/10.1051/e3sconf/202018401045 (Scopus Indexed)


61.  P.ChenneshwariDr.N.Sateesh, Dr.Ram Subbiah, C.Pavan (2020), Optimization of Machining Process Parameters in Al 7175 Metal Matrix Composites Using Taguchi Method, Materials Today: Proceedings. Paper Accepted & available online https://doi.org/10.1016/j.matpr.2020.07.526 (Scopus Indexed)

62.  C.Pavan, Dr.N.Sateesh, Dr.Ram Subbiah (2020), Taguchi Analysis on Machinability of Inconel 600 using Copper, Brass, and Copper Tungsten Electrodes in EDM, Materials Today: Proceedings. Paper Accepted & available online https://doi.org/10.1016/j.matpr.2020.02.113 (Scopus Indexed)

63.  T. Lakshmi Deepak, G. Ananda Mithra, K. Lokesh, B. Sai Chandra, Dr.Ram Subbiah (2020), Stability Of Expanded Austenite By Gas Nitriding Process On Austenitic Stainless Steel Material Under Low Temperature Conditions, Materials Today: Proceedings. Vol 27, Part 2, 2020, PP 1681-1684, https://doi.org/10.1016/j.matpr.2020.03.571  (Scopus Indexed)


64.  Manne VamshiDr.S.K.SinghDr.N.SateeshD.S.NagarajuDr.Ram Subbiah (2020), A Review on Influence of Carburizing on Ferritic Stainless SteelMaterials Today: Proceedings. Vol 26, Part 2, 2020, PP 937-943, https://doi.org/10.1016/j.matpr.2020.01.151 (Scopus Indexed)


65.  Dr.N.Sateesh, S.Devakar Reddy, G.Praveen Kumar, Dr. Ram Subbiah (2019), Optimization of injection moulding process in manufacturing the flip cover of water meter, Materials Today: Proceedings. Vol 26, Part 2, 2020, PP 240-246, https://doi.org/10.1016/j.matpr.2019.11.089 (Scopus Indexed)


66.  Anusha Kale, Dr. Singh S.K, Dr. Sateesh N, Dr. Ram Subbiah (2020), A Review on Abrasive Water Jet Machining Process and Its Process Parameters, Materials Today: Proceedings. Vol 26, Part 2, 2020, PP 1032-1036, https://doi.org/10.1016/j.matpr.2020.01.309 (Scopus Indexed)


67.  G. Lakshmi Prasanna, Dr.B.Tanya, Dr.Ram SubbiahV.Vinod Kumar (2020), Effect of Nitriding on Duplex Stainless Steel – A ReviewMaterials Today: Proceedings. Vol 26, Part 2, 2020, PP 950-955 https://doi.org/10.1016/j.matpr.2020.01.153 (Scopus Indexed)


68.  M. Balasubramanian, B. Stalin , S. Marichamy, K. Anandan , Dr.Ram Subbiah, (2020), Assessment of Weld Joint Strengths on Dissimilar Alloys of Inconel 625 and Aluminium 7068 Using FSW Process, Materials Today: Proceedings. Volume 33, Part 7, 2020, Pages 4677-4680, https://doi.org/10.1016/j.matpr.2020.08.315(Scopus Indexed)


69.  Sheri Vaijayanth, Shivani Koppula, Dr.N. Sateesh, Dr.Ram Subbiah (2020), Effect of RF Carbonitriding and Improvement of Mechanical Properties on AISI 304 Stainless Steel – A Review, Materials Today: Proceedings. Vol 27, Part 2, 2020, PP 1655-1659, https://doi.org/10.1016/j.matpr.2020.03.561 (Scopus Indexed)


70.  Dr. Ram Subbiah, Dr.V.Vinod Kumar, G.Lakshmi Prasanna (2020), Wear Analysis of Treated Duplex Stainless Steel Material by Carburizing Process – A ReviewMaterials Today: Proceedings. Vol 26, Part 2, 2020, PP 2946-2952, https://doi.org/10.1016/j.matpr.2020.02.608  (Scopus Indexed)


71.  B.Chaitanya kumar, P.Sri Charan, Kanishkar Jayakumar, D.Alankrutha, G.Sindhu, Dr.Ram Subbiah (2020), Assessment Of Wear Properties On Low Temperature Molten Salt Bath Nitriding On Austenitic Stainless SteelMaterials Today: Proceedings. Vol 27, Part 2, 2020, PP 1541-1544, https://doi.org/10.1016/j.matpr.2020.03.195 (Scopus Indexed)


72.  M.Divya, Dr.Singh.S.K, Dr.Sateesh Nagari, Dr.Ram Subbiah (2020), Optimisation of Machining Parameters of Wire-Cut EDM on Super Alloy Materials–A ReviewMaterials Today: Proceedings. Vol 26, Part 2, 2020, PP 1021-1027, https://doi.org/10.1016/j.matpr.2020.01.306 (Scopus Indexed)


73.  K. Manjith Srinivas, S. Bharath, P. N. V. Krishna Chaitanya, M. Pramod, Dr.Ram Subbiah (2020), Improving Tribological Properties Of P91 Steels Through Carburizing Process, Materials Today: Proceedings. Vol 27, Part 2, 2020, PP 1575-1578, https://doi.org/10.1016/j.matpr.2020.03.254 (Scopus Indexed)


74.  Shivani K, Pallavi G, Akhila CSnigdha N, Dr.Ram SubbiahDr.S.K.Singh, (2020), An Overview of Duplex Stainless Steel for Strain Induced Martensite Transformation, Materials Today: Proceedings. Vol 26, Part 2, 2020, PP 1028-1031, https://doi.org/10.1016/j.matpr.2020.01.307 (Scopus Indexed)


75.  Dr.Ram Subbiah, Anand PorasK.Ratna BabuM.Mamatha Gandhi, K.Ramya Sree, Ch.Naveen (2020), Influence of Dry Sliding Wear Behavior and Assessment of Properties on Treated AISI310 SS Material by Gas Nitriding Process, Materials Today: Proceedings. Vol 26, Part 2, 2020, PP 2977-2982, https://doi.org/10.1016/j.matpr.2020.02.613 (Scopus Indexed)


76.  Vamshi Manne, Dr.Singh S.K, Dr.Sateesh N, Dr. Ram Subbiah (2020), A Review on Influence of Nitriding on AISI430 Ferritic Stainless Steel, Materials Today: Proceedings. Vol 26, Part 2, 2020, PP 1010-1013, https://doi.org/10.1016/j.matpr.2020.01.298 (Scopus Indexed)


77.  A. Rohit Sai Krishna, B. Vamshi Krishna, T. Sashank, D. Harshith, Dr.Ram Subbiah (2020), Influence and Assessment of Mechanical Properties on Treated P91 Steel with Normalizing Processes, Materials Today: Proceedings. Vol 27, Part 2, 2020, PP 1555-1558, https://doi.org/10.1016/j.matpr.2020.03.201 (Scopus Indexed)


78.  Lakshmi Deepak TAnanda Mithra GLokesh K, Sai Chandra B, Dr.Ram Subbiah, Dr.Swadesh Kumar Singh (2020), A Review on Effects of Nitriding of AISI409 Ferritic Stainless Steel, Materials Today: Proceedings. Vol 26, Part 2, 2020, PP 1014-1020, https://doi.org/10.1016/j.matpr.2020.01.299 (Scopus Indexed)


79.  Divya Marelli, Dr.Sateesh.N, Dr.Ram Subbiah (2020), A Review on Multi Objective Optimization of Wire Cut EDM Process Parameters using Grey Relational AnalysisMaterials Today: Proceedings. Vol 26, Part 2, 2020, PP 3124-3130, https://doi.org/10.1016/j.matpr.2020.02.645 (Scopus Indexed)


80.  Sheri Vaijayanth, Shivani Koppula, Dr.N. Sateesh, Dr.Ram Subbiah (2020), An Overview on AISI 304 stainless Steel Treated with Aqueous Soluted Nitriding Process, Materials Today: Proceedings. Vol 27, Part 2, 2020, PP 1708-1712, https://doi.org/10.1016/j.matpr.2020.03.587 (Scopus Indexed)


81.  J.Anix Joel Singh, T.Vishnu Vardhan, J. Vairamuthu, B. Stalin, Dr.Ram Subbiah (2020) , Analyses of Particle Size and Abrasive Water Jet Drilling of Synthesized Chromel Metal Matrix, Materials Today: Proceedings. Volume 33, Part 7, 2020, Pages 4893-4896, https://doi.org/10.1016/j.matpr.2020.08.441 (Scopus Indexed)


82.  Shivani Koppula, Pallavi Gugulothu, Dr.N. Sateesh, Dr.Ram Subbiah (2020), A Review on AISI 2205 Duplex Stainless Steel Treated with Plasma Nitriding Process, Materials Today: Proceedings. Paper Accepted, https://doi.org/10.1016/j.matpr.2020.03.585 (Scopus Indexed)


83.  Dr.Ram.Subbiah, Md.Rahel, A Sravika, R.Ambika, A.Srujana, E.Navya (2019) Investigation on Microstructure and Mechanical Properties of P91 Alloy Steel Treated With Normalizing Process- A Review, Materials Today: Proceedings, Volume 18, Part 7, 2019, Pages 2265-2269, https://doi.org/10.1016/j.matpr.2019.07.008 (Scopus  Indexed)


84.  Dr.S.K.Singh, Ch.Naveen, Y.Venkat Sai, U.Satish, Ch.Bandhavi, Dr. Ram.Subbiah (2019) Experimental Study on Wear Resistance of AISI 347 Treated With Salt Bath Nitriding and Gas Nitriding Processes-A Review, Materials Today: Proceedings, Volume 18, Part 7, 2019, Pages 2717- 2722, https://doi.org/10.1016/j.matpr.2019.07.134 (Scopus Indexed)


85.  Dr.Ram.Subbiah, K.Lokesh, Shounak Chatterjee, A.Anitha Lakshmi, D.Eswaraiah (2019) Investigation on Microstructure and Mechanical Properties of Treated AISI 440 Steel by Tempering Process - A Review, Materials Today: Proceedings, Volume 18, Part 7, 2019, Pages 2802-2805, https://doi.org/10.1016/j.matpr.2019.07.146 (Scopus Indexed)


86.  Dr.N. Sateesh, S. Devakar Reddy, G. Praveen Kumar, Dr. Ram Subbiah (2019) Optimization of Injection Moulding Process in Manufacturing the Top Cap of Water Meter, Materials Today: Proceedings, Volume 18, Part 7, 2019, Pages 4556 – 4565, https://doi.org/10.1016/j.matpr.2019.07.430 (Scopus Indexed)


87.  Dr.Ram.Subbiah, A.Arun, Dr.S.K.Singh, A Naga Sai Harika, N.Ram, Dr.N.Sateesh (2019) Experimental Study of Wear Behaviour on Al-2014 Alloy Coated with Thermal Spray HVOF (High Velocity Oxy-Fuel) and Plasma Spray Process – A Review, Materials Today: Proceedings, Volume 18, Part 7, 2019, Pages 5151 – 5157, https://doi.org/10.1016/j.matpr.2019.07.512 (Scopus Indexed)


88.  K. Lokesh, M. Mamatha Gandhi, S. Dr.Ravi Sekhar, Dr.N. Sateesh, Dr. Ram Subbiah (2019) Wear Behavior Analysis of AISI440 Martensitic Steel by Annealing and Tempering Process, International Journal of Engineering & Advanced Technology, Volume 9, Issue 1, PP No 1012-1017, DOI: 10.35940/ijeat.A9460.109119 (Scopus Indexed)


89.  A.Arun, K.Ramya Sree, Dr.Ram Subbiah, J.Saranya, Dr.N.Sateesh (2019) Wear on Thermal & Plasma Spray Coated Al-2014 Alloy under Dry Sliding Conditions, International Journal of Engineering & Advanced Technology, Volume 9, Issue 1, PP No 2074-2077, DOI: 10.35940/ijeat.A9572.109119 (Scopus Indexed)

 

90.  Ch.Naveen, Ch.Bhandhavi, K.Ramya Sree, M.Mamatha Gandhi, Dr. Ram Subbiah (2019) Dry Sliding Wear Behavior of AISI310 Stainless Steel with Low Temperature Salt Bath Nitriding and Gas Nitriding Processes, International Journal of Engineering & Advanced Technology, Volume 9, Issue 1, PP No 470-473, DOI: 10.35940/ijeat.A9570.109119 (Scopus Indexed)


91.  Lakshmi Deepak Tadepalli, K. Sunil Kumar Reddy, Dr. Ram Subbiah (2019) Design, Analysis and Manufacturing of a Weight Lifting Human Sized EXO-Skeleton, International Journal of Engineering & Advanced Technology, Volume 9, Issue 1, PP No 2067-2073, DOI: 10.35940/ijeat.A9569.109119 (Scopus Indexed)


92.  Md.Rahel, Lakshmi Deepak Tadepalli, M.Balubai, K.Sunil Kumar Reddy, Dr. Ram Subbiah (2019) Tribological Properties on P91 Alloy Steel Treated With Normalizing & Carburizing Process, International Journal of Engineering & Advanced Technology, Volume 9, Issue 1, PP No 2078-2082, DOI: 10.35940/ijeat.A9573.109119 (Scopus Indexed)


93.  Ratna Deepika, Sreekara Reddy MArul Raj KDr.Ram Subbiah(2019), An Effect of Graphite Nano- Particles on Dry Sliding Wear Behaviour of AA2014/SIC Metal Matrix Composite, International Journal of Mechanical and Production Engineering Research and Development, Vol. 9, Special Issue 2, Jun 2019, 789-794 (Scopus Indexed)


94.  Dr.Ram.Subbiah, Venkat Mohan Kumar (2018), An effect of vacuum annealing & tempering process on AISI431 grade stainless steel material, International Journal of Mechanical and Production Engineering Research and Development, Volume 8, Issue 6, PP No 171-176, ISSN(P): 2249 - 6890 (Scopus Indexed)


95.  Dr.Ram.Subbiah, Y.Pradeep (2018), The wear characteristics of AISI 310 Grade stainless steel material by carburizing and carbo Nitriding process, International Journal of Mechanical and Production Engineering Research and Development, Volume 8, Issue 6, PP No 159-164, ISSN(P): 2249 - 6890 (Scopus Indexed)


96.  A.Anitha Lakshmi, Dr.Ch.Srinivasa Rao, Ahsan Ul Haq, Dr.Nitin Kotkunde, Dr.Ram Subbiah, Dr.Swadesh Kumar Singh (2018), Forming Limit Diagram of AISI 304 Austenitic Stainless Steel at Elevated Temperature: Experimentations and Modelling, International Journal of Mechanical Engineering & Technology, Volume 9, Issue 12, Pages 403-407 (Scopus Indexed)


97.  Dr.S Surendarnath, Dr.Ram. Subbiah, Dr.K. Sankaranarayanasamy, Dr.B. Ravisankar (2017), Finite Element Simulation of Pure Aluminum Processed by ECAP Using New Die Design, Materials Today: Proceedings 4 (2017) 2544–2553, https://doi.org/10.1016/j.matpr.2017.02.108 (Scopus Indexed)


98.  Dr.R.Ganesh, Dr.Ram Subbiah, Dr.K.Chandrasekaran (2015), Dry Sliding Wear Behavior of Powder Metallurgy Aluminium Matrix Composite Materials Today: Proceedings 2 (2015) 1441 – 1449, https://doi.org/10.1016/j.matpr.2015.07.065 (Scopus Indexed).


99.  Ram. Subbiah, Dr.R.Rajavel. (2014), Salt Bath Nitriding on 316LN Austenitic Stainless Steel Material, Australian Journal of Basic and Applied Sciences, 8(2) February 2014, Pages: 188-192 (Anna University Annexure II – Impact Factor 2.0 - ISSN 1991 – 8178. (Scopus Indexed)


100. Ram.Subbiah, Dr.R.Rajavel. (2012), Assessment of Properties on 316LN Austenitic Stainless Steel by Salt Bath and Plasma Nitriding Process, International Journal of Applied Engineering Research, Vol.7, pp 79-84. – ISSN 0973 – 9769 (Scopus Indexed)


101. Ram. Subbiah, Dr.R.Rajavel. (2010), Dry Sliding Wear Behavior Analysis of Nitrided 316LN Grade Austenitic Stainless Steels Using Gas Nitriding Process, International Journal of Theoretical and Applied Information Technology, Vol.19, No.2, pp 98-101. (Anna University Annexure II) ISSN 1992 – 8645 (Scopus Indexed)

Comments